Yard Signs
On the lawn, the verge and the road into the event.
Step 1 of 2
Paper
Size
About yard signs
Materials
Coroplast is corrugated plastic: two flat sheets held apart by ribs, the flutes, which run up and down the sign so a wire H-stake slides in from below. 4mm is the standard yard-sign board and is made in all 18 sizes. 6mm, 8mm and 10mm are thicker boards of the same plastic, stiffer the thicker they are; 8mm and 10mm are made in 17 sizes and 6mm in 12, and a size a board is not made in is not offered on it.
Sizes
Eighteen sizes, from a 12-inch square to 36 x 48 inches. The 6-inch strips (6 x 24, 6 x 32 and 6 x 36) take one line, such as a name or a direction. The squares are 12, 24 and 36 inches; the others run from 12 x 16 to 36 x 48. Each size opens in the editor on ten templates drawn for it.
Your file
Design it in the editor and the print file is made for you, at the sign's full size with the extra edge the cut needs. To use your own artwork, upload an image (a logo, a photo or a finished design) and place it. Before you pay, the print check tells you if a picture is too small to print sharply at that size, or if any words are too small to read from a distance.
How long it takes
Printing takes 5 to 6 business days on 4mm board, and 4 to 5 on 6mm, 8mm and 10mm. Delivery comes after that; the Shipping page has the times.
Made for
Questions
- Are stakes included?
- No. The flutes run up and down the sign to take a wire H-stake, which is not included.
- Can it be printed on both sides?
- Yes. Every size and board is made printed on one side or on both, and the page shows what the second side adds before you choose it.
- Do the signs have grommets?
- No. They are made without grommets or holes, to stand on an H-stake.
- Can I order just one?
- Yes. Yard signs are sold from one sign, and in runs of 5, 10, 50 and 100.
- What can I upload?
- An image file from your phone or computer: a logo, a photo or a finished design. You place it in the editor and can add words and shapes around it.
- How long do they take?
- Printing takes 5 to 6 business days on 4mm board and 4 to 5 on the thicker boards; delivery comes after that.